Table Gum

Table Gum

Table Gum is a adhesive specifically formulated for use as a table gum in garment printing applications. Table gums are applied to printing tables to temporarily adhere fabrics during the printing process, ensuring precision and stability.

Key Properties:

1 The primary function of these table gums is to provide temporary adhesion, allowing for precise and accurate printing.

2 They are formulated to allow for easy removal of the fabric after the printing process is complete.

Applications:

1 “Table gum” refers to adhesives used in textile printing, particularly for holding fabric in place on printing tables.

2 These products are designed to provide the necessary tackiness to secure fabric during the printing process.

3 Pidilite offers a variety of textile chemicals, including those used as table gums.

Usage Instructions:

1 Application Method: Apply an even layer of Pidivyl TGPF onto the printing table surface before positioning the fabric.

2 Drying Time: Allow the table gum to dry to a tacky state before placing the fabric to ensure optimal adhesion.

3 Cleaning: After printing, the table surface can be cleaned with water to remove any residual gum, preparing it for the next use.

Caution:

1. Avoid direct contact with skin and eyes, as it may cause irritation.

2. Do not ingest or inhale the fumes; use in a well-ventilated area.

3. Keep away from open flames, heat sources, and direct sunlight.

4. Store in a cool, dry place, away from children and pets.

5. Dispose of waste material responsibly as per local regulations.

Precaution:

1. Wear protective gloves, safety goggles, and a mask while handling.

2. In case of skin contact, wash immediately with soap and water.

3. f eye contact occurs, rinse thoroughly with clean water and seek medical advice.

4. Use in a well-ventilated area or with an exhaust system to avoid inhalation.

5. Ensure proper storage in sealed containers to prevent contamination and drying out.